China best 2-15Bar Low Pressure Oil Free Air Compressor with Best Sales

Product Description

Air/Nitrogen Oil Free Booster

Oil-free design, meeting ISO8573-1 standard

1 stage or 2 stage compression,2-15bar pressure

Long life, low maintenance cost

Parameters:

Model FAD Exhaust pressure Speed r.p.m Motor KW Note
m3/min cfm
SZV-6/10 6.5 229

10bar

485 37 V-type
2-column
2-stage
 
SZV-8/10 8.5 300 645 55
SZV-10/10 10.5 370 590 75
SZV-12/10 12.5 440 710 75
SZD-16/10 16.0 565 490 110 D-type
2-column
2-stage
SZD-18/10 18.0 635 550 132
SZD-20/1 0 20.0 706 615 132
SZD-22/10 22.0 777 530 160
SZD-25/10 25.0 882 600 185
Note:Performance parameters measured according to ISO1217, reference conditions: inlet temperature 20 C, inlet air pressure 1 barA;
Special specifications can be customized.

SZW Series Characteristics:

Technology advanced 

Oil-free warranty

Longer maintenance period 

Stable operation with low failure rate 

Advanced intelligent control system 

Easy installation

Make sure the oil content of the oil free air compressor is 0 grade,comply with the ISO8573-1 standard.

24h continuous operation high efficiency and energy saving design

Skid-mounted station, could achieve start, load, no-load running and stop in 1 key

Intelligent VSD Control System

·Large adjust range (some models)

·Low start electric current, No impact on power grid

·20% of the total energy cost could be saved after adjustment 
Steady air pipe pressure

·Frequency converter uses wide-yoltage design that meets international standards

·Born small harmonics, for heavy high harmonic say No 

·Could achieve multi-compressors combination control

 

PLC is the SIEMENS,contactor and intermediate relay are used for Sch neider

Intelligent VSD control system is a product developed specially according to the character-istics of PET bottle blowing industry. The system can automatically control the air pressure within a reasonable range according to the gas utilization condition of the gas terminal, and has a variety of protection, which can effectively ensure the safe and efficient operation of the equipment.

24H Remote Monitoring And Early Warning System

To improve the monitoning data and an optional remote monitoring system, the running state of a computer or mobile phone remote monitoring compressor

After-sales Service: 24/7 Engineer Online Service
Warranty: 1year
Performance: Low Noise
Transport Package: Standard Export Packaging
Specification: Variable
Trademark: MFGSP
Customization:
Available

|

air compressor

Can Oil-Free Air Compressors Handle High-Pressure Applications?

Yes, oil-free air compressors are capable of handling high-pressure applications, but certain considerations need to be taken into account. Here’s a detailed explanation of the capabilities and considerations regarding the use of oil-free air compressors in high-pressure applications:

1. Compressor Design:

Oil-free air compressors are designed to deliver oil-free compressed air, and some models are specifically engineered to handle high-pressure requirements. These compressors incorporate robust components, such as high-strength materials, reinforced valves, and advanced sealing technologies, to withstand the higher pressures generated during compression. They are typically designed to operate within specific pressure ranges, and their performance and reliability are optimized for those ranges.

2. Pressure Rating:

When selecting an oil-free air compressor for a high-pressure application, it is crucial to consider the compressor’s pressure rating. The pressure rating indicates the maximum pressure that the compressor can reliably generate and maintain. Oil-free compressors suitable for high-pressure applications are available with varying pressure ratings, ranging from several hundred PSI (pounds per square inch) to several thousand PSI, depending on the specific model and manufacturer. It’s important to choose a compressor with a pressure rating that meets or exceeds the requirements of the intended application.

3. Operating Efficiency:

Operating efficiency is an important consideration when using oil-free air compressors for high-pressure applications. As the pressure requirement increases, the compressor may consume more energy to achieve and maintain the desired pressure. It’s advisable to select a compressor that is optimized for energy efficiency, as it can help reduce operating costs and minimize environmental impact. Compressors equipped with advanced control systems, variable speed drives, and efficient motor designs can enhance overall energy efficiency in high-pressure applications.

4. Air Treatment and Filtration:

High-pressure applications often require dry and clean compressed air. In addition to the oil-free operation, it is important to ensure that the compressed air is adequately treated and filtered to remove moisture, particulates, and other contaminants. The use of appropriate air dryers, filters, and separators in the compressed air system is necessary to maintain the desired air quality and protect downstream equipment in high-pressure applications.

5. System Safety and Regulations:

High-pressure applications present additional safety considerations. It is essential to ensure that the entire compressed air system, including the compressor, storage tanks, piping, and safety devices, is designed, installed, and operated in compliance with relevant safety regulations and standards. Pressure relief valves, pressure gauges, and other safety devices should be appropriately sized and configured to handle the high-pressure conditions. Regular inspections, maintenance, and adherence to safety protocols are crucial to ensure the safe operation of the high-pressure oil-free air compressor system.

It’s important to consult with compressor manufacturers or industry experts to determine the suitability of specific oil-free compressors for high-pressure applications. They can provide guidance on selecting the right compressor model, assessing system requirements, and ensuring compliance with safety standards.

By considering the design, pressure rating, operating efficiency, air treatment, and system safety, oil-free air compressors can successfully handle high-pressure applications in various industries, including manufacturing, automotive, aerospace, and energy.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

How Does an Oil-Free Air Compressor Work?

An oil-free air compressor, also known as an oilless air compressor, operates using alternative methods to achieve compression without the need for lubricating oil. These compressors employ various techniques to deliver clean, oil-free compressed air. Here’s a detailed explanation of how an oil-free air compressor works:

1. Dry Compression:

In oil-free air compressors, the compression chamber is designed to operate without any oil present. The compression process starts with the intake stroke, where ambient air is drawn into the compressor through an inlet valve. The air is then compressed in the compression chamber without any oil lubrication.

2. Friction Reduction:

Since there is no oil in the compression chamber, special measures are taken to reduce friction and wear between the moving parts. These measures include the use of specialized materials, coatings, and surface treatments on the compressor components. These friction-reducing techniques minimize the need for lubrication and allow for efficient compression.

3. Piston Rings and Seals:

Oil-free compressors utilize advanced piston rings and seals to provide effective sealing without the need for oil lubrication. These rings and seals are designed to reduce internal leakage and ensure efficient compression. They help maintain the compression efficiency by minimizing air leakage during the compression process.

4. Cooling Mechanisms:

Oil-free air compressors often incorporate cooling mechanisms to dissipate the heat generated during compression. This helps prevent overheating and ensures the compressor operates within acceptable temperature limits. Common cooling methods include water cooling and air cooling. Water-cooled compressors use a water jacket or a separate cooling circuit to remove heat, while air-cooled compressors rely on fans and heat sinks to cool the compressor.

5. Filtration:

Oil-free compressors typically incorporate effective air filtration systems to remove contaminants, such as dust, particles, and moisture, from the intake air. These filtration systems ensure that the compressed air produced is clean and free from impurities. Depending on the application, additional filtration equipment, such as coalescing filters or activated carbon filters, may be employed to achieve specific air quality requirements.

6. Control and Safety Systems:

Oil-free air compressors are equipped with control and safety systems to monitor and regulate the compressor’s operation. These systems can include pressure switches, temperature sensors, safety valves, and control panels. They help maintain optimal operating conditions, protect the compressor from excessive pressures or temperatures, and provide safety features to prevent damage or accidents.

By employing these techniques and components, oil-free air compressors achieve compression without the need for lubricating oil. This results in clean, oil-free compressed air that is suitable for applications where oil contamination could be problematic, such as in industries like food processing, pharmaceuticals, electronics, and painting.

It’s important to note that the specific design and operation of oil-free air compressors may vary depending on the manufacturer and model. Therefore, it’s recommended to consult the manufacturer’s documentation and guidelines for detailed information on how a particular oil-free compressor works.

China best 2-15Bar Low Pressure Oil Free Air Compressor   with Best SalesChina best 2-15Bar Low Pressure Oil Free Air Compressor   with Best Sales
editor by CX 2023-10-03

Recent Posts