China factory Good Price Air Compressor Oil-Free Centrifugal Air Compressor for Hydrogen Fuel Cell with Hot selling

Product Description

Product Description

Pressurized oil-free centrifugal air compressor

The fuel cell air compressor is mainly used in the fuel cell air circuit to compress the external gas to obtain a suitable inlet pressure and flow rate for the operation of the stack.Oil free air compressors have the following advantages:
1. The oil-free air compressor adopts small cylinders, with a smaller volume and more compact structure;
2. The oil-free air compressor has excellent balance performance and does not require too many parts;
3. Low vibration, but high operating efficiency;
4. The oil-free silent design is used in the design of oil-free air compressors, which will not produce excessive noise during long-term operation;
5. Unmanned duty can be achieved during the work process;
6. The design of oil-free air compressors intentionally avoids excessive components, so they do not require a lot of manpower and material resources for maintenance and upkeep.

 

Product Parameters

Pressurized oil-free centrifugal air compressor

model XT-FCC160 XT-FCC300 XT-FCC300S XT-FCC300P
Rated pressure Ratio(PR) 2.5 2.5 2.5 2.8
Flow (g/s) 58 108 108 97
Air compressor rated power( KW) 9 <15 <15 15.94
Matching system power (KW) 30-50 50-100 50-100 50-100
Intakeair temperature ºC -30-45ºC -30-45ºC -30-45ºC -30-45ºC
voltage ( VDC) 450-750 450-750 450-750 450-750
Start/stop Life (times) >100000 >100000 >100000 >100000

Company Profile

HangZhou Sinopower Technologies Co., Ltd. develops and distributes various products in the hydrogen energy industry chain, including but not limited to hydrogen production, hydrogen storage, hydrogen supply, stacks and BOP parts, fuel cell system assemblies, fuel cell vehicles, etc. We have an experienced professional technical research and development team, which can provide professional services from product selection and matching, system design, product customization development and technical support. We provide hydrogen fuel cell design and R&D services and finished hydrogen fuel cell products for mainstream forklift companies in China. We have experience in stack integration and packaging services and are well received by customers at home and abroad.
 

 

Packaging & Shipping

The packaging of the items is strong and intact, avoiding breakage, leakage, and loss during the shipping process; avoiding damage to the internal items caused by external climate changes.Customize packaging according to the actual product to ensure that the product arrives at the customer’s designated place without damage.

Our Advantages

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Available
Warranty: 1year
Installation Type: Stationary Type
Samples:
US$ 1469/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

What Maintenance Is Required for Oil-Free Air Compressors?

Maintaining oil-free air compressors is crucial to ensure their optimal performance, reliability, and longevity. While oil-free compressors have lower maintenance requirements compared to oil-lubricated compressors, regular maintenance tasks are still necessary. Here’s a detailed explanation of the maintenance required for oil-free air compressors:

1. Regular Filter Replacements:

Oil-free air compressors have filters that help remove contaminants from the intake air. These filters should be regularly inspected and replaced as recommended by the manufacturer. Filters can become clogged over time, affecting the compressor’s efficiency and potentially increasing the risk of contaminants entering the compressed air stream. Regular filter replacements ensure proper air filtration and help maintain the desired level of air purity.

2. Condensate Drainage:

Oil-free compressors produce condensate, which is a mixture of water and oil-free compressed air. Proper condensate drainage is essential to prevent water buildup in the system, which can lead to corrosion and damage. Most oil-free compressors have automatic condensate drains that remove accumulated condensate. It’s important to regularly check and maintain these drains to ensure they are functioning correctly and prevent any blockages or leaks.

3. Inspection of Air Hoses and Connections:

Regularly inspecting air hoses, fittings, and connections is important to identify any leaks or damage. Leaks can lead to air pressure loss, reduced compressor efficiency, and increased energy consumption. Damaged hoses or connections should be repaired or replaced promptly to maintain the integrity of the compressed air system. Regular inspections can help identify potential issues early on and prevent costly breakdowns or inefficiencies.

4. Monitoring Air Pressure and Temperature:

Monitoring the air pressure and temperature of the compressor system is crucial for identifying any abnormalities or deviations from the desired operating parameters. Most oil-free compressors have built-in pressure and temperature sensors that provide real-time data. Regularly checking and recording this data can help detect any potential issues, such as pressure drops, abnormal temperature increases, or excessive cycling. If any abnormalities are detected, they should be investigated and addressed promptly to prevent further damage to the compressor.

5. General System Checks:

Performing general system checks on a regular basis helps ensure that all components of the oil-free air compressor are functioning properly. This includes inspecting the compressor motor, cooling fans, belts, and electrical connections. Any signs of wear, damage, or abnormal noise should be addressed promptly. Additionally, checking the compressor for any signs of oil contamination or unusual odors can help identify potential issues with the compressor system.

6. Manufacturer’s Recommendations:

It’s essential to follow the manufacturer’s recommended maintenance schedule and guidelines for the specific oil-free air compressor model. The manufacturer’s recommendations may include additional maintenance tasks specific to the compressor’s design and components. Adhering to these guidelines ensures that the compressor is properly maintained and can help prevent warranty issues.

Regular and proactive maintenance of oil-free air compressors is essential to ensure their reliable and efficient operation. Following the recommended maintenance tasks, monitoring system parameters, and promptly addressing any issues that arise can help extend the compressor’s lifespan, reduce the risk of breakdowns, and maintain the desired air quality for the intended applications.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

What Industries Commonly Use Oil-Free Air Compressors?

Oil-free air compressors are utilized in various industries where clean and oil-free compressed air is essential for specific applications. These industries rely on oil-free compressors to ensure product quality, maintain equipment integrity, and meet industry regulations. Here’s a detailed explanation of the industries commonly using oil-free air compressors:

1. Food and Beverage:

The food and beverage industry extensively employs oil-free air compressors. These compressors are used in processes such as food packaging, filling, bottling, and product drying. Oil-free compressors prevent oil contamination, ensuring product quality, food safety, and compliance with industry regulations. They help maintain the freshness of food products, prevent flavor or odor contamination, and minimize the risk of product spoilage.

2. Pharmaceutical and Healthcare:

In the pharmaceutical and healthcare sectors, oil-free air compressors are vital for maintaining the purity and integrity of medical gases, powering respiratory devices, and supporting laboratory applications. Oil-free compressors deliver clean and uncontaminated compressed air for critical processes, such as ventilators, nebulizers, surgical instruments, dental tools, and laboratory testing. They ensure patient safety, regulatory compliance, and reliable operation in these sensitive environments.

3. Electronics and Semiconductor:

The electronics and semiconductor industries require oil-free air compressors for various applications. These compressors are used in cleanrooms and manufacturing processes where air quality is crucial to prevent contamination of sensitive electronic components. Oil-free compressors provide clean and dry compressed air for applications like chip manufacturing, circuit board assembly, and air knife systems. They help ensure the reliability and quality of electronic products while minimizing the risk of particle contamination.

4. Automotive and Aerospace:

In the automotive and aerospace industries, oil-free air compressors are utilized for painting, coating, and pneumatic tools. These compressors deliver clean, oil-free compressed air, ensuring high-quality finishes and preventing oil contamination that could affect adhesion or cause defects. Oil-free compressors play a critical role in maintaining the precision and reliability of pneumatic tools used in assembly lines, manufacturing processes, and aircraft maintenance.

5. Textile and Garment:

The textile and garment industries rely on oil-free air compressors for various applications, including powering pneumatic tools, air agitation in dyeing processes, and providing clean compressed air for textile manufacturing. Oil-free compressors prevent oil contamination that could stain or damage fabrics, ensuring product quality and minimizing the risk of production defects. They help maintain efficiency and reliability in textile production while meeting strict quality standards.

6. Chemical and Petrochemical:

The chemical and petrochemical industries utilize oil-free air compressors in critical processes where air purity is essential. These compressors are used in applications such as air sparging, pneumatic conveying, and instrument air supply. Oil-free compressors ensure that the compressed air does not introduce contaminants, ensuring the integrity of chemical reactions, preventing product contamination, and maintaining the safety of equipment and personnel.

7. Research and Laboratories:

Research facilities and laboratories across various industries rely on oil-free air compressors for a wide range of applications. These include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressors provide clean and reliable compressed air, ensuring accurate test results, preventing contamination, and maintaining the integrity of samples and experiments.

It’s important to note that while these industries commonly use oil-free air compressors, the specific requirements may vary based on the application and industry standards. Selecting the appropriate oil-free compressor and adhering to recommended maintenance practices are crucial to achieve optimal performance and meet industry-specific needs.

China factory Good Price Air Compressor Oil-Free Centrifugal Air Compressor for Hydrogen Fuel Cell   with Hot sellingChina factory Good Price Air Compressor Oil-Free Centrifugal Air Compressor for Hydrogen Fuel Cell   with Hot selling
editor by CX 2024-04-23

Recent Posts